GAN 14 PRO 3x3 Magnetic (MagLev UV Coated)

Ready to ship!
$ 77.95
Damage Protection No
Lubrication Service
Exterior Coating
Add Ons None
Martian Lubricant
Stardust Lubricant

GAN 14 PRO 3x3 Magnetic (MagLev UV Coated) builds upon the GAN 14 with a new 'Pro Level Anti-Pop' system and offers a mind-blowing 1,296 different customization settings!

Model comparison
  GAN 14 MagLev GAN 13 MagLev GAN 12 MagLev
Weight 70.3g 71g
66g
GMS V6 enhanced core positioning 4.0 V5 enhanced core positioning 3.0 V3 enhanced core positioning 2.0
Magnet settings 6 6 6 (removable)
Tensioning GES V3 GES V2 GES
Auto alignment 15-40 degrees 30 degrees + 35 degrees +
Storage box Version 11
Version 10 Version 8
Exterior finish UV Coated / Frosted UV Coated / Frosted UV Coated / Frosted

 

UV Coating
  • High gloss exterior finish, improved grip
MagLev features
  • Magnetic repulsion technology
  • No springs required
  • Faster turning feel
Key features
  • Pro Level Anti-Pop system
  • Enhanced core positioning 4.0 auto aligning technology (40 degrees)
  • 88 factory-installed magnets
  • 12 corner/edge magnet settings
  • 6 corner magnet settings
  • Numerical GTN tensioning system (6 settings)
  • 1,296 possible configuration settings
  • Honeycomb piece design for better lubricant distribution
Accessories included
  • Storage bag ($3 value)
  • Storage box (version 11)
  • Adjustment tool
  • CFOP tutorial guide
Read more...

Customer Reviews

Based on 7 reviews
71%
(5)
29%
(2)
0%
(0)
0%
(0)
0%
(0)
S
Samuel E.
Almost great

I love the feels of this cube, but it’s just not quite there, definitely an upgrade from the 13 and 14, but not better than the 12 or 11, I’ve tried so many different setups and just couldn’t find one with proper balance between controllability and corner cutting/not catching, this cube does make me hopeful for the 15, but I still wouldn’t recommend it over the 12, though on the bright side I was able to make it into a pretty good one handed cube

H
Hassan R.
Love it! Better than the GAN 14

I got the Gan 14 Pro Maglev UV after using the Gan 14 for a couple of months. I wasn't having issues with the Gan 14 popping on me, but decided to buy it based on a review I saw on YouTube.

The 14 Pro feels more solid. You can keep the cube fast without it feeling loose or flimsy, especially while corner cutting. The corner cutting feels much better in general on the Pro.

It's smooth right out of the box and even better with some lube. The sound is pleasant and pretty quiet, especially compared to my Moyu RS3 V5 and WRM V9.

The magnets feel about the same as the Gan 14, but without the loose or flimsy feeling.

The out-of-box settings weren't actually all that bad. For my Gan 14, I was using the settings Tension 3, Center Travel 2, center row corners 1, and outer corners at 3.

I set the Pro to the same settings and found it to feel a bit too loose and not quite the same, so I set it to 3313 and I love it. The same settings on the regular 14 feel slightly too tight.

I'm not a huge fan of the new tool to open the center caps because you need to have the tool on you, but it works great, and I haven't shot a single center cap across my room trying to pry it up!

If you're looking at the Gan 14/14 Pro, I recommend skipping the Gan 14 and getting the Pro for the extra few bucks.
---
Lube Note: I've pulled this cube apart twice to clean and try a new lube. I liked my normal lube mix of Lunar and Stardust, then switched to Martian, and then Comet and Stardust, before going back to Lunar and Stardust. I think this works great with faster lubes, but a lube with more control might be great if you are having issues finding the right settings.

S
Shivansh U.
Main Worthy

Really good, slightly on the faster side but i haven't had many popping issues.

R
Ryan K.
Excellent cube!

I love the cube, and SPS ships things insanely fast. I had my cube like 3 days after I placed the order (which is common I've noticed). I tend to use Amazon for everything, but for some reason, I just don't trust Amazon for things like this. Too many fake chinese knockoffs. I trust this place only.

M
Matthew W.
Love the self alignment!

I haven’t lubed it yet but I love how smooth this cube is. It fun to just slow down and flick and watch it align itself. I am not super fast anyway…. My PR is 35sec with a 50sec average. I just started a month-ish ago

Enjoy easy 90-day returns or exchanges using our self-service system. Items that are made to order are final sale unless damaged or defective. Other exclusions may apply. Read full policy here.
Ready to ship!
You have successfully subscribed!
This email has been registered